1 / 6
50 Foot Boxcar (HO)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
American Car Foundry (ACF) 50' 6" Boxcar in HO scale.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 550
- Wydruki
- 2
- Wyświetlenia
- 2022
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (67)Powiązane
American Car Foundry 50' 6" Boxcar in HO scale. For this model you will need to print the following amounts from the list.
- 1x Boxcar end 1
- 1x Boxcar end 2
- 2x Coupler cover A
- 2x Coupler cover B
- 2x Boxcar Side
- 1x Floor
- 1x Roof
- 1x Brake Part 1
- 1x Brake Control 1
- 1x Brake Air Cylinder
- 1x Brake Wheel
- 2x End Bracket
- 1x Mid Bracket
- 14x Pins
You will also need the following additional parts to assemble the car.
- 3 M2x4 screws
- 2 M2x8 screws
- 4 Wheel sets or 2 trucks with wheels
- 2 couplers
- Aprox. 28 grams of weight
- Glue
Instructions:
- Glue 2x Pins into the mid bracket
- Glue step 1 into the bottom middle of the Roof
- Glue 2x pins into the End Bracket and glue Boxcar end 1. Repeat with the other boxcar end
- Insert and glue 6x pins into the side of the assembly from step 3. Attach boxcar side to these pins. Repeat with other side.
- Insert weights to the bottom of the boxcar floor.
- Attach the floor using 1x M2x4 screw in the middle hole.
- Create a coupler box assembly using Coupler box A, Coupler box b, a coupler, and 1x M2x8 screw.
- Attach the assembly using the screw to the ends of the Floor.
- Attach the two trucks using 2x m2x4 screws.