1 / 7
Slim and lightweight 3010/5015 fan and 3D-touch mounter for Kingroon KP3S — zdjęcie 1
1 / 7

Slim and lightweight 3010/5015 fan and 3D-touch mounter for Kingroon KP3S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

We've designed the slim and lightweight mounter for fix the 3010 Hotend Fan, 5015 Section Fan, and 3D touch to the…

Ocena
0 / 5
Polubienia
7
Pobrania
57
Wydruki
0
Wyświetlenia
555
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We've designed the slim and lightweight mounter for fix the 3010 Hotend Fan, 5015 Section Fan, and 3D touch to the Titan Extruder model and share it. This part relies on ribs to secure the 5015. Please be sure to check the preview of the slicer that the rib at the tip is printed. The sensor layout we have to describe in robin_nano_cfg.txt of the 3D-touch compatible firmware assumes follows.

Z_PROBE_OFFSET_FROM_EXTRUDER -2.0

X_PROBE_OFFSET_FROM_EXTRUDER -25.0

Y_PROBE_OFFSET_FROM_EXTRUDER 0

LEFT_PROBE_BED_POSITION 10

RIGHT_PROBE_BED_POSITION 150

FRONT_PROBE_BED_POSITION 10

BACK_PROBE_BED_POSITION 150

In addition, the firmware for 3D Touch often does not update the value of e-steps for KP3S 3.0 titan extruder, so it is recommended to check and update the value as follows.

DEFAULT_E0_STEPS_PER_UNIT 764 #E轴默认脉冲 (steps/mm)

(In Japanese)

Titan Extruderモデルにおいて3010 Hotend Fan と 5015 Section Fan, 3Dtouchを固定するスリムで軽量なマウンターを設計したので共有致します。この部品は5015の固定をリブに頼っています。先端のリブが印刷される事をスライサーのプレビューで必ずご確認願います。

3D-touch対応firmwareのrobin_nano_cfg.txtに記載するセンサ配置は下記を想定しています。

Z_PROBE_OFFSET_FROM_EXTRUDER -2.0

X_PROBE_OFFSET_FROM_EXTRUDER -25.0

Y_PROBE_OFFSET_FROM_EXTRUDER 0

LEFT_PROBE_BED_POSITION 10

RIGHT_PROBE_BED_POSITION 150

FRONT_PROBE_BED_POSITION 10

BACK_PROBE_BED_POSITION 150

また3D Touch用ファームウェアはKP3S 3.0 titan extruder用にe-step数を更新していない事が多く、下記も確認の上で数値更新がお勧めです。

DEFAULT_E0_STEPS_PER_UNIT 764 #E轴默认脉冲 (steps/mm)

参考サイト:3D Touchで自動ベッドレベリング – KINGROON KP3S情報 http://hitoriblog.com/kingroon_kp3s/docs/how_to_do_automatic_bed_leveling_with_kingroon_kp3s/


cf. Imported from the following on 2023.07.02.
https://www.thingiverse.com/fukumay/designs

Tagi