1 / 1
Screws for tires in FLEX/TPU for Little pit stop — zdjęcie 1

Screws for tires in FLEX/TPU for Little pit stop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the screws for tires printed in FLEX/TPU for the Little pit stop models.

Ocena
0 / 5
Polubienia
3
Pobrania
32
Wydruki
0
Wyświetlenia
261
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I 3D printed my tires using 40D FLEX material. 

However, they ended up getting stuck on the screws due to the tight tolerance. 

To fix this issue, I modified the cylinder part of the screw by reducing its diameter to 9.7mm. Now, the screws fit perfectly with the FLEX/TPU tires.

I would like to express my gratitude to rorys3D for providing the Little Pit Stop models.