Ultracompact CR-10 Standalone Project - TFT35
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get rid of the control box and save a bit of space!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I picked up a CR-10 V1 and wanted a few upgrades and to get rid of the original control box. I tried a few different standalone projects, didn’t find one that I really liked, or that needed excessive modifications. I decided to build my own and 20 revisions later this is what I have. The print you download is what you see in the pictures and should fit both the original using original screws.
As part of the Ultimate Standalone project there are also:
Ultracompact CR-10 Standalone Project - Control Housing
Ultracompact CR-10 Standalone Project - Power Supply Mounts
Ultracompact CR-10 Standalone Project - Legs
Just print, place the screen in the back cover and pressfit the fron on. It should not be super tight and can come apart fairly easy. You could hot glue it if you wanted a more permanent hold.