1 / 2
Wyze Cam Mount for Original Prusa Enclosure /w Magent slots
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An update adding slots for square magnets. Now works with Wyze V2 that doesn't the screw mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Uses 4 6.6mm x 6.6mm x 3.3mm square magnets double stacked. They are rather strong so I mounted the stacks in opposite polarity to keep them from popping out. Also, you could just glue them in place
Print settings:
- Material: PETG
- Nozzle: 0.6mm
- Layer Height: 0.4mm
- Infill: Doesn't matter
