Feet for Oontz Angle 3 Speaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raises it up ~15mm so it can dry out.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've had an Oontz Angle 3 in the shower for years, because it is waterproof and the shower is a great time to continue listening to audiobooks. Unfortunately the little feet it has only give it ~1mm clearance off the tile, so water that finds it's way under the speaker never has a chance to evaporate. I measured out the dimensions of the little foot it has and made an extension for it, raising the overall height off the tile to about 15mm.
Print two, they'll line up on the little rubber feet. Maybe print at like 98% scale and it'll ‘grab’ the foot to stay attached a little better, at 100% these are really just to sit on.
I used some eSun TPU95A since it's what I had in the printer and it works really well.