MK4 Camera Mount - X_idler Clip-on
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MK4 Clip-on Camera Mount for X__idler
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 321
- Wydruki
- 20
- Wyświetlenia
- 2106
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this as an alternative to @ebeeche's excellent x-axis mount, as I was having some x-axis collisions with V1 of his mount. Rather than using the top surface and radius of the x-idler, I took a different approach using the idler's “belt tunnel” and the front faces for a tension-based clip-on. I also moved the camera mount point slightly further outboard to ensure the camera is outside the bed envelope.
To attach this mount, first engage the back portion into the belt tunnel of the x-idler, then just push and rotate the front towards the extruder until it snaps into place. I recommend PETG with (3) perimeters for strength, (4) bottom and (5) top layers, and 15% gyroid infill. Other users have reported PLA works fine as well.
For the full camera mount, you will need to print this model, then print the Camera Arm and Cable Clamps (STL files included here for convenience, without change, from @ebeeche's original). Attach the C270 to the Arm using an M3x25 screw. Attach the Arm to the Mount with a M3x18 screw and M3 nut. Finally, route the cable and slide on the cable clamps.