Parametric Frame for HueForge Filament Paintings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Floating Frame - with spacers.
- Ocena
- 5 / 5
- Polubienia
- 321
- Pobrania
- 1676
- Wydruki
- 23
- Wyświetlenia
- 8325
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this minimalist floating Frame for my HueForge Filament Paintings.
Included are the Fusion360 file and a .step file
In Fusion 360 just change the user parameters “objectwidth” & “objectheight” to match your painting dimensions and Fusion will automatically adjust the frame model to have a consistent 5mm gap around all sides of your painting.
You can then export either a .step file or an .stl to load in your slicer of choice.
Also in the file is a corner spacer: print 4 of these to help align your painting when gluing down.
Edit: I have added a .3mf for a 200x200mm filament painting by request. For I can upload specific sizes for folks without fusion, just message me.
Edit: 09/28/23 Added a 200x150 frame by request and added a newer version of the parametric frame in which the hanger works better with smaller parameters.