Simple Razor Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple razor holder I created for using in our shower. Should fit most of the available razors/shavers.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 359
- Wydruki
- 1
- Wyświetlenia
- 1674
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple razor holder I created for using in our shower. Should fit most of the available razors/shavers. It's not the prettiest but it's useful :)
Short version available here: https://www.prusaprinters.org/prints/53548-simple-razor-holder-short-version
Print instructions
Even though not recommended, I printed it with PLA. Let's see how long it's going to last.
Measurements:
Overall height: 70.00mm
Overall width: 52.00mm
Space between the two back plates: 3.25mm
Space between the two hooks: 32.00mm
Depth of the hooks (from back plate to inside hook): 12.00mm
It should fit any "standard" sized razor/shaver like the Gilette you can see on one of the pictures.