Leopard Gecko House (Designed to fit in GEX EXOTERRA 400Slim Cage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3-storey Gecko House
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 690
- Wydruki
- 1
- Wyświetlenia
- 3955
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Intro
Three storeys to give your Gecko a choice of environments.
First Floor: Nearly completely hidden
Second Floor: Protection from above and 3 sides, but a wide outward view
Third Floor (Roof): High but unprotected position to observe in all directions
Since giving my Gecko this, he goes between all floors, with a natural preference for the 1st and 2nd floors since he is well hidden compared to the 3rd floor. He will occasionally climb up to the 3rd floor, which gives him a great view, and gives me a great view of him too.
Printing
Supports required for both ceilings.
With an average ~230mm bed, you might be able to get bed-only Organic Supports in at a large angle, but risk of mid-print breakage of supports is high.
If you have trouble with sagging of ceilings, I recommend standard supports and printing on the model itself.