PC4-M10 Filament Filter Capped
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament filter designed to connect to a PC4-M10 coupler and PTFE tube.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 199
- Wydruki
- 2
- Wyświetlenia
- 1407
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A filament filter designed to connect to a PC4-M10 coupler and PTFE tube.
The opposite end has a chamfered insert to help prevent bent/twisted filament from jamming up the system. A second variant of this back piece is designed to be mounted to a surface with screws or adhesive.
A small chunk of foam fits inside the cavity. Just cut one from a new and clean sponge. Ram a pointed end of filament through it a few times once in place to make a hole and remove any debris. Then attach this to your PTFE tubing.
If you consistently have trouble getting the filament through into the coupler/PTFE tubing, try chamfering the end of the PTFE tubing.