1 / 4
VF-1J Valkyrie - Battloid Mode — zdjęcie 1
1 / 4

VF-1J Valkyrie - Battloid Mode

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based on a Macross Skull-1 toy. This is the VF-1J in Battloid Mode.

Ocena
0 / 5
Polubienia
158
Pobrania
920
Wydruki
2
Wyświetlenia
3817
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

NOTE: Ensure the knee rotates in the correct direction prior to any glueing. The holes for the elbow, knees, shoulder are tight. I was trying to make them stiff as possible. 

This is a model based on a real life Bandi Skull-1 Toy. I took mine apart, measured each piece and recreated it (for the most part) in Fusion360. My version isn't as complete as the original so each mode has to be printed separately. So my third offering is VF-1J in Battloid Mode. 

 

 

I recommend to print with 3 walls at 0.2 with organic supports. Each STL file has the parts pre-orientated (with the exception on this model of the Body and Canopy, please read the instructions) for the best print quality. Included is a instructions.pdf which show's how pieces go together. 

Here are the print times I had with these setting. 

There is Gerwalk (Guardian) and Fighter (plane) mode you can download as well in my published models.

Any questions, issues or comments please feel free to send me a message. 

Also check out the Things to Come.jpg :3

Max

Tagi