Dust bin for VW Polo 2018 center console
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Version 2 of the dust bin for VW Polo 2018 center console.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 1141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is the Version 2 of the dust bin for VW Polo 2018 center console. The first Version was reworked to now connect dust bin and cap much tighter. Especially the cap has been strengthened.
Print instructions
Category: Organization Summary
This is the Version 2 of the dust bin for VW Polo 2018 center console. The first Version was reworked to now connect dust bin and cap much tighter. Especially the cap has been strengthened.
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
</div>Rafts:Doesn't Matter
Supports:
No
</div>Resolution:0.2
Infill:
20
</div>Filament:
any PETG -
Notes:
PETG recommended due to the higher temperatures in the car in summer. With PLA especially the lid can bend.
For the dust bin cap no support or raft is needed. You can use Brim if it does not adhere to the printing bed.The dust bin itself also should not need any support. You can use Brim, if it does not adhere to the printing bed, but it should also be fine without.