X-axis linear rail upgrade and LM10LUU 10mm rod Z-axis for MK3S/ MK3S+/ MK3.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I confirmed upgrading to MK3.5 is available without any problems.
- Ocena
- 4,833 / 5
- Polubienia
- 63
- Pobrania
- 202
- Wydruki
- 7
- Wyświetlenia
- 2944
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This mod is a modification that incorporates X-axis linear rail upgrade and adapts MK4's 10mm rod X-axis parts and Z-axis parts to the size dimensions of MK3S, MK3.5.
In addition to the difference in rod diameter of 10mm, there are other reasons why the print parts of Prusa MK4 cannot be directly used with MK3S. One of the causes is that the Z-axis position is shifted 7mm outward on both sides, resulting in a failure to calibrate the PINDA sensor.
So, I changed the Z-axis to the same position as MK3S. And since I have already upgraded to XY-axis linear rails, I remixed the “MK3S Upgrade to MK4 Prints (8mm Z) with X Linear Rail” by Clock_Watchdog to match the shorter X-axis compared to MK4.
The dimensional differences in the position between the MK4 that I modified to be the same as MK3S are as follows:
- The MK4's Z-axis lead screws shifted 7mm outward on both sides.
- The Z-motor mounting position is 2mm higher (this is because the MK4 has a 2mm rubber pad in between).
- The new frame of the MK4, the mounting positions for the Z bottom and Z top parts are pre-elevated, Parts making them 0.8mm thinner compared to the MK3S.
- The MK4's x endstop distance is 0.5mm longer.
Parts required for assembly:
- x1 MGN12 rail 350mm with MGN12H block for X-axis
- x2 Smooth rod 10 x320mm for Z-axis
- x2 LM10LUU linear bearing for Z-axis
- x1 Smooth rod 8 x330mm with LM8UU for X-axis (If you require a more robust X-axis, please add this upgrade. It is an option that can only be selected if you have also upgraded the Y-axis to a linear rail and have the removed rods on hand.)
- x4 Rubber pad 20x10x1 mm
Notes:
- The X-carriage is compatible with the “Prusa MK3/MK3S/MK3S+ X-Axis Linear Rail Guide Upgrade - updated (Bondtech Extruder)/MK3S+ Tensioner” by KalleKnall for the X-carriage.
- For assembly reference and information on the screws and other components to be used, please refer to "Original Prusa MK4 kit assembly 1.0".
- I am currently assembling and using it for testing purposes, and so far, I haven't encountered any issues.
- “Why don't you use the stock 370mm for reinforcing the X-axis with an 8mm rod?” It is because the thickness of the LM10LUU doesn't allow enough space for sufficient rod extension. This is not a problem with the MK4 as it has a longer length for the X-axis.