Gridfinity Allen Key Holder [Improved Version]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tighter fit, rounded edges, aligned text, faster print and included tolerance test
- Ocena
- 4 / 5
- Polubienia
- 34
- Pobrania
- 427
- Wydruki
- 2
- Wyświetlenia
- 1392
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Discription:
I have remixed the model to prevent my Allen keys from rotating in the holder.
With a tolerance of 0.6mm from the original model, I can insert the keys into the smaller adjacent slot or freely rotate them in the designated slot.
Furthermore, I have made minor improvements such as rounding off edges and aligning the labeling.
To account for variations between printers, I have conducted tolerance tests for 4mm wrench.
My remix has a tolerance of 0.15mm.
With my printer, the Allen keys easily slide into the openings with gentle pressure.
If you desire a different tolerance, please let me know, and I will create the corresponding model accordingly.
Settings:
Sunlu PLA
0.2mm layer height
20% infill
3 perimeters
No supports
Feedback:
If you find this model useful, please feel free to show your appreciation by liking it. You can also share it, showcase your prints using it, or provide suggestions for improvement. Your feedback is greatly appreciated and reaward for the work i put into this.