Ender 3MAX - Heavy Duty EZABL Mount.. Solid NO FLEXING
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a HD version for factor mount for the EZABL bed level system... EZABLE is MUCH better than BL-CR Touch
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
PRINT 6 WALL LOOPS AND 50% FILL. MAKE EXTRA STRONG YOU DON'T WANT ANY MOVEMENT AT ALL
this mounts fits Ender 3MAX - in factory location, this is a HD version for the EZABL Leveling system.
I re-made this to make it more solid so there is no flexing, it make the measurements more accurate to give you better prints.. prevents movement, hole and tolerance are much tighter.. should use 2mm longer screws over stock, also allows use of socket head allen screws over button heads
the EZABL System is by far better and more accurate than the BR-Cr Touch…if your version Ender is open source firmware.. this will increase the quality of your prints.. the best money you can spend to have a great level system… unlike the creality lever this never touch bed and no pin that can fall down and destroy your print or printer… super upgrade. i have 15 printer here with them and would not use anything but… they are the best