Wood Dungeon Door with Bar - Hinged
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This door is a remix of Robagon's Wood Dungeon Door with the addition of four brackets to hold a bar on the door.
- Ocena
- 4,5 / 5
- Polubienia
- 51
- Pobrania
- 266
- Wydruki
- 2
- Wyświetlenia
- 937
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This door is a remix of Robagon's Wood Dungeon Door with the addition of four brackets to hold a bar on the door. The bar was made from a scaled down middle section of Robagon's Straight Header Door to match the wood texture.
Because of the outer brackets, the current design can only open one way.
Depending on your printer, it might take some scaling of the bar to get a snug fit.
The brackets for the door didn't come out perfectly, however I think part of that is my printer.
Print Settings
Printer Brand:
FlashForge
Printer:
Rafts:
Yes
Supports:
No
Resolution:
0.08mm
Infill:
20%
Filament: Hatchbox PLA blue
Notes:
The original designer recommends a brim, but I used a raft because my old build plate is warped.
Nozzle Diameter: 0.4mm
Print speed: 25mm/min