1 / 4
Ultrasonic Fogger Floater for Fogponic / Aeroponic Gardening — zdjęcie 1
1 / 4

Ultrasonic Fogger Floater for Fogponic / Aeroponic Gardening

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model floats in water to allow for optimal water delivery of up to 4 ultrasonic foggers. Can be used for gardening.

Ocena
0 / 5
Polubienia
28
Pobrania
65
Wydruki
0
Wyświetlenia
1235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello and welcome,

this model is designed to float on water and to provide optimal water delivery for up to 4 ultrasonic foggers (16/20mm ceramic piezeo). This can be used in a fogponic setup to grow e.g. different types of lettuce.

(Parts: 2 Ultrasonic fogger driver boards, 4 piezeo elements and 4 foam straws) 

(Source: Aliexpress “Ultrasonic Fogger Driver”)

 

Assembly:

  1. Cut the foam straws in half and stuff them into the inserts of the floater. It is designed to have a tight fit, so that the foam staws will not fall out.

2. Test fit the piezeo elements. Make sure that they fit in the socket and have light contact with the foam staws. The contact to the foam staw is important for high amounts of fog.

3. Add wiring and make it waterproof(ish) with shrink tubes.

4. Add cover and M4 bolts.

5. Connect wires to driver board. Place floater in water and let the foam staws pull water for about 10 minutes. Power the driver board and adjust the foam staws, so that a lot of fog is produced.

 

(6. Add deflectors to reflect the fog stream and to create a vortex)

Tagi