Two way screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "screw" that can thread a clockwise and counterclockwise nut. It's just satisfying to play with.
- Ocena
- 4,953 / 5
- Polubienia
- 541
- Pobrania
- 4521
- Wydruki
- 145
- Wyświetlenia
- 13 307
- Oceny
- 64
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a "screw" that can thread a clockwise and counterclockwise nut. It's just satisfying to play with.
Original idea from: https://youtu.be/cDfMI5ahbJI
Some people have asked for various variations of the screw but I haven’t had time to make most of them. I uploaded a longer screw and shorter nuts which were the easiest requests to fulfill. These are untested so print at your own risk, although they should work since I just extended or shortened the original models
Print instructions
Category: Toys & Games Summary
This is a "screw" that can thread a clockwise and counterclockwise nut. It's just satisfying to play with.
Original idea from: https://youtu.be/cDfMI5ahbJI
Edit:
Some people have asked for various variations of the screw but I haven’t had time to make most of them. I uploaded a longer screw and shorter nuts which were the easiest requests to fulfill. These are untested so print at your own risk, although they should work since I just extended or shortened the original models
There are lots of remixes that might be what you’re looking for so check them out!
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
</div>Rafts:No
Supports:
No
</div>Resolution:0.15
Infill:
25%
</div>Filament:
Prusament PLA purple