Sign "Security Notice - Do not store your passwords on post-its"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic sign for the information security / cybersecurity enthusiast reminding everyone how to not store their passwords
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a sign for the average PIBKAC ('Problem is between Keyboard and Chair'), hopefully raising awareness among your colleagues, family etc. on how to not store passwords. As simple as the warning may sound, it still happens. ;-)
This is the start of a series of Information security / cybersecurity prints - I will update this post with links to the other resources as soon as these are uploaded.
What is needed?
The sign works best as a multicolor print. If you are like me and want to have as few filament changes as possible (in case you print with a single extruder) to save time and waste, print the sign and the frame separately. Of course, the sign will do its job also without the frame, it will just not look as nice imho. Hence, download either the ‘[…]sign_complete’ or the ‘[…]sign_without_frame’ and ‘[…]frame_only’.
How to print
Import the relevant file in your slicer and scale it to whatever you like. Just keep in mind that, if printed too small, the text might not be clearly readable anymore. I suggest to print at a minimum of 65% (resulting in a width of approx. 182mm). Then, change the color of the text on the sign in your slicer - and frame, if you are lazy and don't bother about time as well as filament waste.
Use any material you like. I used basic PLA. Any layer height will work, the smaller the layer height though, the nicer the sign will look like.