Remix camera grip for right hand shooters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the camera grip by paul020559 for right-hand shooters without the quick-release plate mount.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the camera grip by paul020559 without the quick-release for a right-handed shooter.
Prints well using PETG but you can also go with PLA, keeping in mind that it's quite brittle.
Like in the original model, I also added an .3mf file which has appropriate settings for (snug) supports under the screw for your camera mount, infill and layers in the handle. As in the original model, the base is printed with 100% infill and the handle with 20% and 4 perimeters. You may choose your layer height but I went with 0.20mm and grid infill for speed and strength.