MLOK Hand Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combination design inspired by the Emissary Development Handbrake and the Slate Black Industries Slate Stop.
- Ocena
- 4,5 / 5
- Polubienia
- 24
- Pobrania
- 136
- Wydruki
- 2
- Wyświetlenia
- 1178
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
Description:
Similar to the Slate Black Industries Slate Stop, but with a longer grip similar to the Emissary Development Handbrake.
The front section is great for use as a handstop/angled grip, and the notch at the back is good when you're bracing against a barricade.
Hardware:
Only needs 1 screw/nut! I modeled it with hardware I have on hand (4mm-ish), so if you have issues with hardware compatibility let me know!
Print Instructions:
I used 4 walls and 70% infill, but do what works best for you. I printed with the mlok notches on the build plate, and I think that's probably best. This model is a great candidate for Fuzzy Skin!