Hygger Aquarium Light Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Semi-customizable Hygger aquarium lights mounts that can be used on framed and frameless aquariums.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 990
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Depending on orientation, these can be printed with or without support.
I like to print the legs with support and standing upright so you don't have one side printed with the texture of your bed. Since I use a glass bed it would cause one side to be shiny.
Once you print Bracket 1, Bracket 2 and a pair of legs, you just use a little superglue and glue the legs to the brackets right on your aquarium so it's a perfect fit.
The 12mm legs fit standard Aqueon/Marineland framed aquariums.
Keep in mind that the brackets need to be directly over the edges of your aquarium. See photos
I am working on new brackets that would allow slightly smaller lights to fit on aquariums that are slightly longer than the light is.
If you need a leg with a custom glass width, please let me know and i can make one for you.