1 / 8
Smart roadster soft top roof repair kit parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Good luck with these parts. I used rivets to connect the parts. Remove central pin, fit into place and widen the end…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 286
- Wydruki
- 0
- Wyświetlenia
- 1338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (11)Powiązane
Good luck with these parts.
I used rivets to connect the parts. Remove central pin, fit into place and widen the end of a rivet with phillips screwdriver and hammer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
100
Infill:
80
Filament: PolyMaker PETG
Notes:
I've printed with PETG, but you should use engineering plastics. As hard as you can find. The best known for me option is nylon.
Also, the best option (IMO) is SLS nylon
Category: Automotive
