HoneyComb Storage Wall - Stack Printing with AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stacked 14 inverted HSW to get near 24H print time.
- Ocena
- 4,714 / 5
- Polubienia
- 863
- Pobrania
- 3990
- Wydruki
- 5
- Wyświetlenia
- 32 438
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Trying to speed up printing a HSW, Stacked 14 inverted HSW to get near 24H print time.
With AMS on X1C each "layer" of HSW is printed with PLA or PETG, that permit each layer to not be glued to each other (So 1st HSW in PLA, 2nd in PETG, 3rd in PLA etc..) .
--
Update 09/07/2023 : print fine with ludicrious setting, under 15H
--
Update 14/07/2023 : added 211x248 model too
--
Update 15/07/2023: added test print of a 3x really small HSW for test print
After being asked multiple time about the difficulty to separate each layer, here is a video about that :
--
Update 19/12/2023: added stl file as I got lot of demand, don't know if it will work as there it wont support auto filament change. Think user will have to time a filament change each 40 layers, if using 0.2mm layers ….. use at your own risk