Ticket to Ride Card Tray Organizer - Easier Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix which is slightly easier to print than the original if your bed adhesion isn't immaculate.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 900
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a remix which is slightly easier to print than the original if your bed adhesion isn't immaculate. In the original, the individual rail ties of each rail in the base of the cardholder must be printed individually and in my case a couple would fail every time leading to the rest failing. Here, I have made a plate underneath each rail tie, which admittedly doesn't look as good as the original, but prints a ton easier.
NOTE: This print is designed to fit the smaller 44x68mm cards which come with the American version of the game, and will not fit the 87x56mm cards. Measure before you print!
Category: Games