Apex Legends led lamp

Today I made RGB  Led lamp inspired by logo of the Apex legends game.

It is necessary to print bottom part on max 0.2 quality and top part should be printed at 0,08mm quality. You will still probably need to sand it a little to help it fit inside.

I used remote controller and board from this lamp:
https://www.aliexpress.com/item/1005005128982828.html?spm=a2g0o.order_list.order_list_main.141.1ef61802t6a9bj

(you can also use this one https://www.aliexpress.com/item/1005005281496031.html?spm=a2g0o.productlist.main.37.28ba4c95NSo4A2&algo_pvid=8f4b8586-9e09-45d3-a751-8769ebfda5af&algo_exp_id=8f4b8586-9e09-45d3-a751-8769ebfda5af-18&pdp_npi=3%40dis%21EUR%2111.87%2111.87%21%21%2191.20%21%21%402102191b16885686846883785d0782%2112000032487165061%21sea%21SK%21141031292&curPageLogUid=sSpMx9ehsZcj)

(they have their own effects, but you can do the same with ESPs and WLED
 

First I unsoldered controller from the original led strip in bought lamp, I then soldered board to ws2812b led strip. It has USB cable so its "plug n play".

I put the strip in lamp in two parts, but now that Im looking at it 1 is probably enough. Also you can use aluminium foil to make leds more visible and for brighter effects. 

While putting out support for the inside “C” (meant for holding the cable, you can probably print it without support) in bottom part, it broke. But nonetheless you dont actually need it. I just glued it with glue gun so it holds in place.

I put a few photos of the effect, maybe later I will add a video. You get the point :) 

Let me know if u make some changes, or upload some makes and have fun printing :) 

Filaments used:

Gembird white PLA 1,75

Creality EN Black PLA 1,75

Printed on Creality ender 3 neo

The logo is made from PC game logo, that means its probably not for commercial use, also thats why I chose Noncommercial license.