EVA 3 Tank Shroud for 3DO Nozzle CAM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix allows you to use a 3DO Nozzle CAM on your EVA 3.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a 3DO Nozzle CAM and would like to use it on your EVA 3 mount, this remix allows you to do that with a remix of the Tank Shroud. The camera and LEDs mount on an extension to the front of the shroud. You will need to adjust the focus of the camera, as the camera is sold with a 34.5mm fixed distance and the distance with this mod will be ~30.374mm. I have provided both STEP & STL exports of the remix.
I recommend creating a stress release loop with the camera ribbon cable, instead of placing a hard crease/fold in the ribbon cable. You can use a tiny amount of hot glue to attach the ribbon cable to the inside of the shroud, being careful to not apply any stress to where the ribbon cable attaches to the camera. I have the ribbon cable exiting the shroud near the top, but don't yet have a permanent solution for mounting the PCB. This is not a permanent solution, but it will get you up and running while I consider a better overall solution.
If you have a BLTouch, I have created EVA 3 BLTouch remix for Tank Shroud to allow the BLTouch to mount behind the shroud.