1 / 3
Bambu AMS purge size Calibration (up to 4 colours) — zdjęcie 1
1 / 3

Bambu AMS purge size Calibration (up to 4 colours)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Calibrate the flush/purge size of your Bambu AMS with this model. Its available for 2 or 3 filaments & support.

Ocena
5 / 5
Polubienia
79
Pobrania
683
Wydruki
3
Wyświetlenia
3378
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution

These models are designed for a easier AMS purge/flush calibration on a Bambulab X1C or P1P with AMS.

There are multiple files, of which you can chose for:

  1. Single flush calibration test (filament 1 vs filament 2)
  2. Double flush calibration test (filament 1 vs 2 and filament 2 vs 1)
  3. Triple flush calibration test (3 colours cross each other)
  4. Four filaments flush calibration test (actually 3,5; fourth filament only partly)

You can open the 3mf file in Bambu Studio. Change filament 1, 2, 3 and 4 to the ones in your AMS and press print. After that you can use the scale to determine the flush amount.

Please let me know if these model were useful to you.

 

I want everyone to get the most out of their 3d printer, therefore my creations are free. However, if you like what I did, you can show your appreciation trough paypal.me/CreativityCrush. It might encourage me to create more. ;-)

Tagi