1 / 1
The Afterburner (for AnkerMake M5 Direct Noctua A4 Extruder Fan Mount) — zdjęcie 1

The Afterburner (for AnkerMake M5 Direct Noctua A4 Extruder Fan Mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An additional part that adds static blades after the moving fan blades to increase static pressure output of the fan.

Ocena
0 / 5
Polubienia
10
Pobrania
54
Wydruki
0
Wyświetlenia
911
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The Afterburner is an additional part that adds static blades after the moving fan blades to increase static pressure output of a Noctua A4 (40mm) fan. 

It's designed to interface with the duct from the AnkerMake M5 Direct Noctua A4 Extruder Fan Mount as a way to get just a bit more performance out of the fan. Don't expect any miracles with this, but it can give you that slight boost you need when the ambient temp is hot.

I printed mine in PETG, but it doesn't really get hot at all so use whatever you'd like. I used supports just to get cleaner blades, but I don't think they're required. I'd be interested to see what this would be like printed in TPU. 

I remixed a model I found on here for speed of design, but was initially inspired by the Voron StealthBurner's extruder fan mount. Their’s is a bit more polished but this one is effective from my limited “feel the output with my finger” tests.

Print testing has gone great and I haven't noticed any stress or abnormal noise from the Noctua fan. It will be a touch louder after install, but you won't notice it at all from 6 feet (2 meters) away.

This is just a “good enough” starting point, but feel free to remix this design (I do not have a CAD model) and post it!

Tagi