1 / 6
Replacement Dishwasher Transport Wheel Rear Feet Height Adjustment (Whirlpool Kitchenaid Kenmore Maytag) — zdjęcie 1
1 / 6

Replacement Dishwasher Transport Wheel Rear Feet Height Adjustment (Whirlpool Kitchenaid Kenmore Maytag)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for WP8269831 8269831 wheels at bottom rear of many US dishwashers. Requires one 30mm M3 bolt & nut.

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
275
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

While moving my Whirlpool dishwasher to a new home, I lost one of the rear “transport” wheels. They are also used to adjust the rear height, function as the rear feet, and appear to be used on a number of different brands (Whirlpool, Kenmore, Estate, KitchenAid, Maytag) and models so I've included all these as keywords.

It's separated into 4 parts, so no supports are needed. Each piece has a recess for the cone-shaped protrusion from the piece below it, so they connect solidly once assembled.

Print them, stack them up, and use a 30mm M3 bolt and nut to secure them together. Photo of original Whirlpool part attached so you can assemble correctly. (The two middle pieces are not interchangeable.  Stack the parts to create a large gap between the two smaller discs, and a small gap between each large and small disc.)

I printed in PETG, with 5 perimeters and 30% Gyroid infill, but do whatever works for you.

Tagi