1 / 5
NEJE Max4 Laser Cutter - Fixture for Drag chain X Y
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Usefull pieces to install a drag chain X & Y axis on the NEJE4Max
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
If you are also not convinced of the new more or less loose cable managment, then this is for you ;)
printed in PLA, 15% infill, no support - So easy to print, and stable enough for this purpose.
need additionaly some M3 M4 screw, an aluminium plate around 93x3cm , and 2 drag chain 10x20mm (outside) 1m