Catalyst Machineworks Shocker Tank - mount for Insta360 One R 4K
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
couldn't find many insta360 one R 4k mounts at all, even less so for the catalyst machineworks shocker tank, so I…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
couldn't find many insta360 one R 4k mounts at all, even less so for the catalyst machineworks shocker tank, so I grabbed an existing one, cut of the foot, and replaced it by some feet that mount to the shocker tank.
printed in TPU with 12% infill (shouldn't matter too much).
note the legs its standing on are quite tall as I wanted to lift it will above props height, I might create a second version shortening that by a few mm.
edit as the first version was on a quite flat angle, I've made a V2 that's angled 20% backwards, to film a bit less ground.
Print Settings
Printer:
Artillery Sidewinder X1 V4
Rafts:
No
Supports:
Yes
Infill:
12
Filament: 3D Jake TPU TPU Black
Category: R/C Vehicles