Parkinson's Pill bottle insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the viral TikTok video, I revised a insert for a pill bottle I made 5 years ago.
- Ocena
- 4 / 5
- Polubienia
- 105
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 4269
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Inspired by the viral TikTok video, I revised a insert for a pill bottle I made 5 years ago. In this version, you can keep the standard pill bottle and Rx label you get at the pharmacy. The insert holds all the extra pills back and dispenses only one at a time.
You can also use a 8 mm straw to help control the flow of pills.
This is designed to fit in a 30 mm x 70 mm amber pill bottle that is found in many big box pharmacy's. I'll work on a parametric version in the future.
To clean dip in cold bleach solution.
Video of this can be found at https://youtu.be/jC7ye_0ZjIc
Pill-tube4.stl is shown in the pictures & video. 5 & 6 are prototypes with a speed bump and offset cut for the different designs. If you printe and use these please let me know how they work.
Print instructions
0.2-0.3 layer height.
This is printed in PLA, but you can print in PETG, TPU, Nylon or other materials.
For support material check your settings to make sure that you can cleanly remove it. Concentric supports recommended.