Toyota 4Runner Hitch Cover With 5/8" Pin Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another Toyota 4Runner Hitch Cover - this one has a hole so it can be secured with a 5/8" hitch pin.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 300
- Wydruki
- 2
- Wyświetlenia
- 1419
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Yet another Toyota 4Runner Hitch Cover - this one has a hole so it can be secured with a 5/8" hitch pin.
This is a dirty remix of the original model. It's “dirty” in that I just grafted an extension on without a whole lot of regard in making it perfect, hence there are visible lines where things aren't aligned perfectly, but it's in the receiver so you won't see it anyway! :-)
Designed for a 5th gen, it would fit previous generations fine as long as they didn't move where the hole is!
When I originally printed this model I made the hitch pin hole a bit too small. In the attached STL and FreeCAD it's currently 18.5mm which should work fine. Please let me know if you find the hole too big or small. I know it doesn't align perfectly with the receiver hole, but it's plenty close enough.