Space-Saving Tissue Box Holder (Puffs brand)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your nose is like mine, you are constantly in need of a box of tissues!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If your nose is like mine, you are constantly in need of a box of tissues! The only trouble is that those boxes take up valuable counter space, so I came up with a tissue box holder that hangs the box just off the edge of a counter or table top. Still perfectly accessible, but not hogging all that real estate. The mount can be attached as pictured with a Command Strip, double stick tape, or just gaffe or duct tape over the top (depending on the WAF).
It's designed to fit a Puffs brand tissue box. It hooks on and holds the box very securely (I've never had a tissue box come off of the holder). It gets daily use at my house, one of the most useful things I've come up with :-)
Print instructions
Print in PLA with at least 3 perimeters so the model is stiff enough. If you print as-is in the 3MF file, you won't need any supports. With the model on its right side, the hexagon pattern is positioned with the hexagon points facing upwards, which print just fine. There might be a little stringing in between the hexagons, but that cleans up immediately with a heat gun.