1 / 3
Simple magnetic stir plate — zdjęcie 1
1 / 3

Simple magnetic stir plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a very simple and affordable stir plate design that has a unit cost of <$10.

Ocena
5 / 5
Polubienia
107
Pobrania
198
Wydruki
2
Wyświetlenia
2242
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

There's a few different designs out there for magnetic stir plates usually based around PC fans. I really wanted a stir plate that could stir at both low and high speeds and was simple to construct and safe to use.

The unit cost for one stir plate is $9.50 for the electronics. Everything is printed in PLA with 20% infill and no need for supports.

Assembly is pretty straight forward hook the power jack up to the PWM controller where it says DC in and the 12V motor to the PWM controller where it says motor.

The power jack and 12V motor are hot glued in place and M3 screws are used to secure the lid to the base.

Here's the part links (I have only tested the Amazon parts linked, but since the Alibaba parts should be cheaper I would love to hear about if anyone uses them):

12V motor

Amazon(tested): https://www.amazon.com/gp/product/B07CJNXTV1/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Alibaba(untested):

https://www.alibaba.com/product-detail/High-torque-low-speed-rpm-carbon_62139089260.html?spm=a2700.galleryofferlist.normal_offer.d_title.4b46635byn7NAe

PWM speed controller

Amazon(tested):

https://www.amazon.com/gp/product/B07GP72BWV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Alibaba(untested):

https://www.alibaba.com/product-detail/Mini-DC-DC-4-5V-35V_1600868356590.html?spm=a2700.galleryofferlist.normal_offer.d_title.a7e4294bB8da0R&s=p

12V 1 A power supply

Amazon(tested):

https://www.amazon.com/gp/product/B082D7W362/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Alibaba(untested):

https://www.alibaba.com/product-detail/6V-9V-12V-15V-18V-0_1600835786939.html?spm=a2700.galleryofferlist.normal_offer.d_title.5aae13c1AdCISb

Magnets

Amazon(tested):

https://www.amazon.com/gp/product/B09QHS6VSJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Alibaba(untested):

https://www.alibaba.com/product-detail/Cylinder-5Mmx3mm-Magnets-Iman-De-Neodimio_1600608478356.html?spm=a2700.details.0.0.1d9934b4WM3FTb

you'll also need 3mm x 10 mm screws and some 20 gauge electrical wiring. If you need to purchase that here's part links:

20 gauge wire

https://www.amazon.com/gp/product/B08CC1DLQF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

M3 screws

https://www.amazon.com/gp/product/B0B51BFSWZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Tagi