Overhang Angle Stress Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just realised that i never done any overhang / angle stress test before... therefore rather to download one from the…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 102
- Wydruki
- 3
- Wyświetlenia
- 823
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just realised that i never done any overhang / angle stress test before... therefore rather to download one from the internet... I decided to design one by myself...
This testing tools consists of 6 different overhang angles: 15', 30', 50', 60', 70' and 80'... with a 50mm long bridging... I had tried 4 different PLA colours with 6 attempts... finally got 1 successful print...
Surprisingly the 80' are barely survive during the prints... I guess i need to adjust the design to 75' instead.... so let's try again...
Print instructions
3D Printer: Prusa i3 MK3S
Slicer: PrusaSlicer 2.3.0
Layer height: 0.2 mm Quality
Print time: 1 hrs 38 mins
Print speed: 45 mm/sec
Dimensions (LxWxH): 56mm x 7mm x 56mm
Avoid Crossing Perimeter: Off