X Axis Motor Cover for Sovol SV05

This is a replacement cover for the X-Axis motor of the Sovol SV05 printer.  The Sovol SV05 is a clone of the Creality Ender 5.  The two printers share many parts, many of which are actually branded with the Creality name, so it's entirely possible, or should I say “extremely likely” that the injection molded part from which the measurements for this design were made is actually a Creality part.  It should fit the Ender 5, and looks remarkably similar to the X-Axis motor cover of the Ender 3 as well so it may work on those machines too.

I created this part for the purpose of incorporating it into a design I'm working on for drag chains.  If there's one gripe I have with the SV05 it's that cable management on this machine appears to have been not even an after thought…  This part is intended to be a direct replacement for the cover on the SV05 and other machines.  This is actually version 2 of this design.  I wasn't going to include the opening on the side, which I think would be for wiring to a limit switch who's mounting holes I wasn't going to include either, but later decided to in case anybody wanted to use it on machines that do have a limit switch mounted in this fashion.

The external dimensions are identical to those of the original part, however, I did make the walls significantly thicker than the injection molded part, and instead of the grid pattern on the underside of the top, it has a full 5mm of material.  I test fitted this on my SV05 and it installed just as easily as the original part was removed.

If you print this for a machine other than the Sovol SV05, PLEASE drop me a note indicating the machine for which you made this, and whether or not it worked for you.