1 / 1
Pirates Of The Caribbean- The Black Pearl Fixed and split
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ship split to print easier/print on smaller beds.
- Ocena
- 0 / 5
- Polubienia
- 92
- Pobrania
- 813
- Wydruki
- 0
- Wyświetlenia
- 5119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (119)Powiązane
I repaired the model with 3d builder as the model had impurities, and i also split the model in half with also flag separate for easier print and glue with blender.
Next up is to make sails thick enough for a common 0.4mm nozzle to be able to print it horizontally and not 90 degree/vertical.
(it's 3am, so that will make the next project update as even vertically, the sails are too thin.
If you like what i do, please consider throwing a few breadcrumbs my way :)
https://ko-fi.com/duckers