Prusa MK4 y-axis belt tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a belt tensioner with a toothed pulley. Adapted from https://www.thingiverse.com/thing:2786671
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 188
- Wydruki
- 7
- Wyświetlenia
- 2500
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mk4 belt tensioner with front access. Belt holder modified to MK4 belt holder dimensions.
Tensioner frame mount adjusted to hold the GT2-20 pulley(15mm diameter).
Printed with PETG, 20% infill, support overall to keep hole dimensions.
Additional hardware:
(1) M3 x 30mm socket head screws with Nylock nut to hold the swing arm
(1) M3 x 30mm socket head screw with Nylock nut to hold the pulley
(1) M3 x 30mm socket head screw with Nylock nut for adjustment
(1) GT2 Pulley 6 mm belt | 20 teeth | 3 mm axis
Note: this is for a GT2-20T idler for 6mm belt only...
Update: Added a frame with square nuts as in the original Prusa X idler