E14 lamp and shade - adjustable desk mount remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small remix to add an E14 light bulb and shade to the adjustable desk mount model.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 911
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Warning use only LED light bulbs ! Otherwise the model will melt (trust me, I did the test).
The adjustable desk mount is a great model. Here is a remix to make it into a desk lamp. There is the head for an E14 socket, and lamp shade. Everything else (arms, screws and clamp) should be fetched from the original model from InaniaEtVana.
The head may need supports, for the right and top sides of the socket. Depends on how your printer is tuned.
Lamp shade should be printed in PETG, as transparent as you can. See Rygar1432's note for some information about printing “glass”. Note the STL orientation is wrong, the three arms must be on the print plate.
The clips are used to hold the power cable. As the name implies, they are made to be clipped on the arms (see photo). There are two versions of the clips, to be clipped on the sides of the arms (that is what I use) or on the faces (I feel the power cable will then prevent an easy use of the screws, but YMMV).
If you need other-shaped lamp shades, drop me a message.