1 / 3

Belt Z-axis gear ratio 80:20

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a belt driven Z-axis

Aktualizacja u źródła: 8 lip 2023

Informacje o modelu

I run my Ender on Klipper so I had to change my (printer.cfg) file a bit.

I change this on the Z-axis or “[stepper_z]”

add “ gear_ratio: 80:20”

and change “rotation_distance: 40”

u need

80 tooth gear for 6mm belt and 5mm axel- 2 pcs

20 tooth gear for 6mm belt and 5mm axel- 4 pcs

20 toothless pully for 6mm belt and 5mm axel- 2 pcs

6mm belt around 2meters

6mm belt that is 250mm- 2 pcs

M3 inserts- 16 pcs

M5x10 screw- 6 pcs

M5x15 screw- 2 pcs

M3x10 screw- 12 pcs

M3x25 screw- 4 pcs

M3x15 screw- 4 pcs

M3 T-nut- 8 pcs

M5 T-nut- 6 pcs

16x5x5 bearings- 6 pcs

5mm axle 52-53mm long- 2 pcs (I did use a bolt that i did cut in length)