Big Tree Tech Manta M8pCase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the Big Tree Tech Manta M8p board. Everything fits, but could still use some advice on changes.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
OK….. removing the work in progress status as everything fits and Manta M8P is installed and working. I made some tweaks to the holes for the board. The board mounts and the lower fan mounts take a M3 screw, and all other items use m2 at various lengths to fit the fans you plan to use. tweaked the cowl to use the screws for the lid fans to attach.
If you downloaded on 7-7-23. the overall height of the case needed to be adjusted to have clearance for the TMC drivers. Use version 2.3. I have tested it and the height is good and i added an bigger opening for the antenna. Prints in about 5 hours using no supports and CHEP profiles on ender 3v2.
Also made some changes to the fan vents in the top. use version 1.2 as well as the fan cowls at version 1.2.
This is a case for the Big Tree Tech Manta M8p board. I have printed the case twice as i made some tweaks but have not printed the lid, feet, or cowl. I am printting those now and will update as this is a work in progress. I printed with no supports at a .28 layer height using CHEP ender PLA profiles. I will change this description once i have all the bugs worked out.
The blue case is from version 1. It was a VERY tight fit. My biggest concern is the over all height in relation to the TMC 2209 fins. I should be able to resolve this in the lid, but printing that now.