Everything Presence One Skadis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Skadis Mount for the Everything Presence One (EP1) by Everything Smart Home
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 72
- Wydruki
- 2
- Wyświetlenia
- 746
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
I love my EP1 by Everything Smart Home, and for a while I was happy with the mounting options as well. Then it dawned on me. I have an Ikea Skadis peg board. Why not mount it there?
This mount is printed in 2 pieces to avoid excessive supports. The two parts are connected using a heat set insert and a M3x8mm screw. Affiliate links to those here:
Screw set: https://amzn.to/3XWRAMF
Heat set inserts: https://amzn.to/44griah
Pinecil Soldering Iron (I cannot recommend this enough): https://amzn.to/44gPCZA
Non-Affiliate link for EP1: https://shop.everythingsmart.io/en-us/products/everything-presence-one-kit
Assembly Instructions
- Insert heat set insert into the ball part using a soldering iron.
- LET THE INSERT COOL OR YOU WILL PULL IT OUT IN THE NEXT STEP.
- Screw an M3x8mm screw through the Skadis plate and into the heat set insert. We use the heat set insert to pull the screw head flush with the plate.
- Fin
Printing Instructions
Print with at least 15% infill. The Skadis plate may need organic supports, but the ball piece doesn't.