Playing Cards Box--Living Hinge, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small box to hold a deck of cards with 6x2 magnets, F3d, STP files included.
- Ocena
- 3 / 5
- Polubienia
- 69
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 1302
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I've had this idea for a while to play around with living hinges and make a folding support-free box. The walls are extra thick to account for the magnet size. The model “should” be fully parametric, though I make no guarantees--I'm still learning. Edit f3d and STP files as much as you like. Make sure your bottom layer is completely smooth. There are only 2 layers for the folding hinge so any gaps compromise the integrity of the box.
Glue in 6x2 magnets. Mine had a gap so I added another magnet to one side. I believe I fixed it in the model, but I can't quite remember now. Superglue the top and bottom halves together, let dry completely before putting anything inside.
Share your remixes and improvements, I want to see them! Don't forget to try out this living hinge design test. Happy Printing!