Water Drain Funnel for Rocket Espresso Cellini Evoluzione v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Product improvement so water is not leaking anymore.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 803
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Product improvement so water is not leaking anymore.
I happend to own such a Espresso machine and it has the possibility to connect the water drain to the sewage system. The problem was that this funnel only has a 8 mm diameter at the outlet which causes the water to run over. See pictures.
So here is a different funnel, that has a 19mm diameter that can directly be connected to a standard machine machine tube.
Since that change the water never run over again.
Disclaimer ;-)
This is my first 3D construction in freecad and I'm very sure that there are a lot better ways to construct that thing.
Oh, and it is also my first print on my own prusa printer! :-)
Print instructions
Use support from print bed.