Hex Twist Lock for Prusa MK3 & MK4 Extrusions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use to secure items to the printer extrusions.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 65
- Wydruki
- 5
- Wyświetlenia
- 826
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
While making my MK4 Mesh side box model I needed a way to attach the box to the printer without having to take off the face plate. So, I basically recreated the rubber foot from the bottom of the printer in PLA and attached a spacer and hex head to it.
I printed this with PLA using a 0.4 nozzle at 0.20mm Quality. I suggest printing it in the orientation in the .gcode file with organic supports.
The lock is designed to hold an object between the hex head and the printer extrusion. Depending on the spacer used, the object can be ~3mm to 7mm thick. The attached object will need a hole ~15mm aligned with the recess in the extrusion for the anchor of the lock to pass through.
To install you'll need one M3n nut and one socket head M3 screw for each set. Install the M3n hex nut into the lock. Then assemble the three pieces. The size of M3 screw will depend on which spacer you use; the 2mm spacer needs a M3x12, the 4mm spacer needs a M3x14, and the 6mm spacer needs a M3x16 screw.
Pass the lock through the hole on the object you want to attach. Then, slide the lock into the recess on the extrusion. When placing the lock, care should be taken to line it up so that the extrusion is in the grove on the anchor piece.
Once the lock is in place, it will be very hard to turn the first time. I suggest using a small adjustable end wrench (Crescent wrench) to force the lock 90 degrees. That will create a very tight lock to the extrusion. Note: If you repeatedly lock and unlock the Twist Lock it will eventually wear the plastic so that you can turn it by hand, but it will still hold your item tightly against the extrusion.
If you really appreciate my work, you can also donate to my PayPal filament fund:

Note: The Twist Lock was designed in Fusion 360 and sliced in PrusaSlicer 2.6. I'm mainly posting this as proof of concept. Hopefully this model will be improved upon by more talented designers in the future. To that end, I've attached my Fusion 360 design file. Any feedback is greatly appreciated.