Water Bottle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of the bike bottle holder.
- Ocena
- 4,5 / 5
- Polubienia
- 36
- Pobrania
- 336
- Wydruki
- 3
- Wyświetlenia
- 1438
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Made the bottom flat for better printing and added more reinforcement to make it stronger. I also widened the holes to use the original bolts from my bike. Fits a 7 cm or 2.75 in water bottle. Still says V3 because I couldn't figure out how to remove it. If you know how to dm me, please. :)
Requires supports and I printed it in PETG with 20% Gyroid infill. I added a brim, but it probably isn't necessary. I had an issue with it breaking along the layer lines as I pulled it off the buildplate on my first try, but I increased my temps and lowered my cooling and now its super strong.