Extruder cable support for Prusa mk2s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extruder wire support for mk2s model, such that there are no more slags touching the heatbed and ruining the print.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 245
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
As we all know, Prusa's mk2s extruder wire connection slags sometimes and touches heatbed, which can lead to print fails as well as wire tear.
To avoid such errors, I have designed a part that can support this wire bunch easily thus securing the wires or prints.
You will just need one M3 * 17mm Allen screw to tighten this part with the frame, thus keeping the wires in place.
Being easy to remove and install, I have also made it as flush design so that nothing gets affected while printing or homing from that height.
It has been designed in such a way that, if printed in stock colors it looks like stock part.
This is completely user friendly design meaning any layman can install it keeping it ready to remove whenever cables going to extruder needs replacement or servicing. Just plug out the spiral wire bunch and start servicing, no need to remove any screws unless that frame face needs to be put on ground.
Update 19-07-23:
The wire kept falling, hence revised the design to be tighter and bit more sleeker appearance. Adding a v2 design